SAT systems of linear equations: substitution and elimination
A solution to a system makes both equations true at once. Substitution and elimination are two ways to find it; the graph shows where it is.
These are the concepts this skill rests on, the same pages as in the lesson.
What a Solution Is
One Point on Both Lines
A system of equations is two equations that must be true at the same time. A solution is an ordered pair that makes both equations true. Each linear equation graphs as a line, so the solution is the point the two lines share: where they cross.
The lines and cross at , and makes both equations true. The point is on the first line, since , but not the second, since . A point on one line only is not a solution.
On a graphing calculator, type both equations as written and select the crossing point to read the solution. For most SAT systems, algebra is faster and gives you an exact fraction; use the graph to check the crossing.
Graph and a second line, . It starts with , where the lines meet at . Set : the shared point moves to . Set : the lines are parallel, so there is no shared point and no solution.
A Solution You Are Given
Sometimes the question hands you the solution and asks for a missing constant. There is nothing to solve: substitute the pair into the equation that has the constant.
The solution to and is . Put and into the first equation: , so and . Write with parentheses so the sign is not lost, and keep the order: the first number is always .
Half a pair. If only one coordinate is given, use the equation without the constant first. Suppose the solution has , and the equations are and . The first gives , so . Now the full pair goes into the second: , so .
Substitution
Substitute an Isolated Variable
When one equation already gives a variable by itself, replace that variable in the other equation with its expression. That leaves one equation in one variable.
In and , the in the second equation becomes :
Then . Keep the parentheses: the 2 multiplies the whole expression, so , not . The same move works when an equation gives a number, such as : put the 4 in place of .
Set Two Expressions Equal
When both equations give the same variable, as in and , the two expressions must be equal at the solution.
Set them equal and solve: , so and . Put into either equation: . On the graph, the crossing is the one place where both lines have the same for the same .
Elimination
Add When the Terms Are Opposites
If both sides of one equation are equal and both sides of another are equal, then the two left sides added together equal the two right sides added together. When one variable has opposite coefficients, adding makes it cancel.
and add to , so . Put it back into either equation: , so . Write the equations stacked, with the terms in one column and the terms in another, so matching terms are easy to see.
Subtract When the Terms Match
When one variable has the same coefficient in both equations, subtract one equation from the other.
minus gives , so , and then gives . Subtracting changes the sign of every term of the second equation, its constant too. Adding these two equations would give , and nothing cancels.
Scale First, Then Eliminate
When no terms match, make them match: multiply one equation by a number so one variable's coefficients become opposites (or equal). Multiply every term, the constant included.
In and , multiplying the second equation by 3 gives . Now add: , so .
- Back-substitute. Put into either original equation: , so .
- Check the pair in both original equations: and .
If neither coefficient divides the other, as with and , scale both: multiply one equation by 5 and the other by 3, so both have .
Combining Without Solving
Ask for What the Question Wants
A question may ask for , , or instead of or . Before you solve, check whether adding or subtracting the equations gives the asked-for expression directly.
and have swapped coefficients. Adding gives , and dividing by 8 gives , with no solving at all. Subtracting gives , so .
Sometimes one equation must be multiplied first. In general, look for numbers to multiply each equation by so that the left sides combine into the expression asked for, then do the same to the right sides.
A Repeated Block Is One Unknown
When the same expression, such as , appears in both equations, treat it as a single unknown. Give it one letter, solve for that letter, then answer the question.
In and , call by the letter . Then and add to , so . If the question asks for , the answer is 3; if it asks for , then .
Systems on a Graph
Read a Line From Its Graph
To work with a graphed line, find its equation in the form . The y-intercept is where the line crosses the -axis. The slope is the rise divided by the run between any two points on the line.
This line crosses the -axis at . From to , it runs 1 and rises 2, so its slope is , and the line is . A line that falls from left to right has a negative slope.
- To match a system to a graph, check one feature at a time: the sign of each slope, then each intercept. One wrong feature rules a choice out.
- To test a third line, read the crossing point of the two graphed lines, then substitute it into the third equation. The third line passes through the solution only if the equation comes out true.
- Read the scale first. If each gridline is worth 2, a point two gridlines up is at 4.
- If a line crosses the -axis off the grid, find its slope from two points, then put one point into and solve for .
How Many Solutions
Crossing, Parallel, or the Same Line
Two lines in a plane can do only three things, so a linear system has exactly one solution, no solution, or infinitely many solutions.
Compare the equations in slope-intercept form:
- Different slopes: the lines cross once. Exactly one solution: and .
- Same slope, different intercepts: the lines are parallel and never meet. No solution: and .
- Same slope and same intercept: the two equations describe one line, and every point on it is a solution. Infinitely many solutions: and , which divides to .
A graphing calculator cannot always tell two parallel lines that are close together from one line, so decide the count with the equations.
The Coefficient Test
For equations in standard form, , compare the coefficients directly. Write both equations with the variable terms on the left and the constant on the right first.
- Look for one factor that turns the first equation's -coefficient and -coefficient into the second's. In and , the factor is 2.
- If no single factor works, the lines cross: exactly one solution.
- If one factor works, check the constant. Here , so the equations are the same line: infinitely many. If the second constant were 7, the lines would be parallel: no solution.
A test that never divides: for and , compute the test number . Here . If the result is not zero, there is exactly one solution; if it is zero, check the constants. This works even when a coefficient is 0: for and , it gives , so exactly one solution.
Writing a partner equation. To give a partner, multiply it by a number. Keep the scaled constant, , for infinitely many solutions; change it, , for no solution.
Infinitely Many, Written With a Letter
When a system has infinitely many solutions, every point of the shared line is a solution. A question can describe all of them with a letter, such as , that can be any real number.
and are the same line. Let . Then , so , and every solution is . Setting gives the points , , and .
To test a choice, substitute it into the shared line and simplify; the letter must cancel. gives , which is not always 5, so the swapped pair is wrong.
Choosing a Constant
A question can put a letter such as in one equation and ask which value gives no solution or infinitely many. Use the coefficient test, in three steps.
- Collect the terms. Write each equation as . Here becomes .
- Find the factor from a pair of coefficients you know, and apply it where the letter is. Against , the factor is , so .
- Check the constants. , not 20, so at the lines are parallel: no solution.
If the letter is the constant, as in and , the left sides already match: gives infinitely many solutions, and any other value gives none. Exactly one solution is impossible. A slider on a graphing calculator shows the lines move as the letter changes, but the constant check still has to be done by hand.
If the letter appears in both equations, as in and , set : or . Check each. At both equations are , the same line. At the first is , which times is , while the second is : parallel, no solution.
Word Problems With Two Unknowns
Name Both Unknowns, Then Write Two Equations
A word problem gives two facts about two unknown amounts. Name each unknown with "the number of" and its unit, then turn each fact into one equation.
A shelf holds 32 books. Each paperback is 1 inch thick, each hardcover is 2 inches thick, and together they fill 44 inches. Let be the number of paperbacks and the number of hardcovers.
- Count: .
- Inches: each kind's thickness times its count, added: .
Subtracting gives , so . Each equation counts one thing in one unit. If both of your equations count books, one of them is wrong.
Two Orders of the Same Items
Not every word problem has a count equation. Often the same two items appear twice, in two orders, two trips, or two months, with a different total each time.
Three pens and 2 notebooks cost $9; 1 pen and 4 notebooks cost $13. Each row of the table is one equation: and , with and the prices in dollars. Solving gives and .
| The facts | The two equations |
|---|---|
| a count and a total value | one adds the counts; one adds price × count |
| a mixture of two strengths | one adds the amounts; one adds what is in each amount |
| two orders of the same items | the same prices, used twice |
| "3 times as many" plus a total | a comparison, such as , and a sum |
| with and against a current | speeds and , each distance ÷ time |
Test a comparison with numbers. "Three times as many fiction books as nonfiction books" is : 10 nonfiction books means 30 fiction books. Last, reread the question: it may ask for the other unknown, a difference, or a new total.
Keep going
Build the basics first
Foundations has free readiness checks and lessons in the English and math the SAT expects.
Check Your Skills, the strategy for each kind of question, worked examples and practice from Easy to Hard are in the Quaero SAT Course.
More Algebra
Linear equations in one variable
Solve SAT linear equations by keeping both sides equal: balancing, simplifying each side, answering what is asked, word problems and how many solutions.
Read the concepts →SAT essentials · MathLinear equations in two variables
Read slope from two points, switch between the three forms of a line, find intercepts, and spot parallel and perpendicular lines.
Read the concepts →SAT essentials · MathLinear functions
Use function notation, read the rate of change and starting value from a rule, table or graph, and build a rule from words.
Read the concepts →SAT essentials · MathLinear inequalities
Solve one-variable inequalities, flip the sign at the right moment, turn “at most” and “at least” into symbols, and handle whole-number answers and ranges.
Read the concepts →