SAT linear functions: rate of change and starting value
A linear function grows by the same amount at every step. Find that rate and the starting value, and the rule, the table and the graph all line up.
These are the concepts this skill rests on, the same pages as in the lesson.
Functions and Their Rules
A Function Is an Input-Output Machine
A function is a rule that turns each input into exactly one output. In , the letter names the rule, is the input, and is the output.
is not times . It is read "f of x": the output that makes from the input . So means "the output when the input is 4," and here .
A linear function is one whose rule can be written . Every function rule here is linear.
Substitute for Every x
To find , replace every in the rule with . Think of each as a slot.
Put the input in each slot with parentheses, then follow the order of operations: . Without the parentheses, gives the wrong answer, 4.
The same holds for any form of the rule. For , . For , .
Forward or Backward
The first decision is not algebra. It is: is the given number an input or an output?
| What you are given | What it asks for | What you do |
|---|---|---|
| an input, as in | the output | substitute |
| an output, as in | the input | set the rule equal to it and solve |
| a pair, and a letter in the rule | the letter | substitute both numbers and solve |
All three, on similar rules. With : , and means , so . If instead and , then , so .
Some questions run both ways. If and , what is ? Backward first: , so . Then forward on the input asked about: , and .
A Rule on a Changed Input
Sometimes the rule is stated on an expression, as in . That is not the rule for .
To find , make the inside equal the input you want: , so . Then use that on the right side: .
The trap is putting 5 straight into the right side, which gives 11. Match the inside first; in general, the number in is not the on the right.
Combining Two Rules
Two rules can be combined. For , evaluate each rule at 2, then add the outputs.
With and : and , so . A multiple works the same way: .
To find a feature of a combination, such as where , add the rules first: , which is 0 at .
One rule can also feed another. In , work from the inside out: , then .
Rate of Change and Starting Value
Equal Steps, Equal Changes
A table of a linear function shows its pattern: each time the input goes up by the same step, the output changes by the same amount.
Here goes up by 1 each column and goes up by 3 each time. That constant change, per one unit of input, is the rate of change. The output at is 1. So .
Check one row: , as the table shows.
The table shows , starting with a rate of and a starting value of . Change to change the step between outputs. Change to shift every output without changing that step.
Desmos labels the table columns and . These are still the input and output , now listed in a table.
The Rate of Change
In , the number is the rate of change: how much the output changes when the input goes up by one. On the graph, it is the slope.
From to the output rises 2 while the input runs 3, so . Subtract in the same order on top and bottom. A falling line has a negative rate: the output goes down as the input goes up.
The Starting Value
In , the number is the starting value: the output when the input is 0. So , and on the graph it is where the line meets the vertical axis.
Never take the first output you see as . Ask which input it belongs to. Here is on the line, but its input is 4, so 2 is not the start.
The starting value hides in two ways:
- The rule is not expanded. In , neither 3 nor 7 is . Expand: , so .
- The known point is not at 0. If the rate is 5 and , then , so .
A Change in Output Uses Only the Rate
How much does the output change when the input changes? Multiply the rate by the input change. The starting value cancels.
Both lines rise 4 from to , because both have rate 2 and the input moves 2. For , , with no need to find either output.
The same idea runs backward. If a linear function satisfies for every , then 3 input units add 12 output units, so the rate is .
Intercepts and Shifts
The graph of has two intercepts. Each comes from setting one coordinate to 0.
- -intercept: set the input to 0. It is , the starting value.
- -intercept: set the output to 0 and solve . For , gives .
Adding a number to every output moves the graph up units, or down if is negative: is the same line 4 units higher. The slope stays the same, and only the starting value changes. A line parallel to the graph of also keeps the same slope .
Tables and Graphs
Uneven Steps in a Table
A table's inputs do not always go up by 1, or even by the same step. The rate is still the change in output over the change in input, row by row.
- Check the input steps. Here they are 1, 3 and 1.
- Divide each output change by its own step. , and all give 2.
- Find from any row. , so , and .
- Check a row you did not use. .
The costly mistake is using a jump between rows as the rate. The jump of 6 above came over 3 input units, so the rate is 2, not 6.
Difference or Ratio
One test tells a linear table from an exponential one. Over equal input steps, look at how the outputs change.
- The same amount added each step (a constant difference): linear.
- The same factor multiplied each step (a constant ratio): exponential, which is not a linear function.
5, 9, 13, 17 adds 4 each time, so it is for inputs 0, 1, 2, 3. 4, 6, 9, 13.5 multiplies by 1.5 each time, so no linear rule fits it.
Read the Scale, Not the Boxes
A graph's boxes are not always worth 1. Read what one box is worth on each axis before you count anything.
- Read the scale. Here one box up is 10, and one box across is 1.
- Pick two points you can read exactly, where the line crosses gridlines: and .
- Rate = change in output ÷ change in input, in units: .
- The starting value is where the line meets the vertical axis: 10.
So this line is . Counting boxes would give a rate of .
Rules From Words
Starting Amount Plus a Rate
Most word problems in this skill have one shape: something happens once, and something else repeats for each unit of the input.
A gym that charges $20 to join and $6 per class has . What repeats multiplies the input; what happens once is added.
- Name the input and its unit first: is the number of classes.
- Put the rate in that unit. 50 cents a minute, with the input in hours, is $30 an hour.
- Flip a rate given upside down. 4 minutes per page is page per minute.
A Steady Decrease Is Still Linear
A quantity that loses the same amount each unit is linear with a negative rate: , with .
A tank that holds 300 liters and drains 25 liters an hour has . It is empty when : , so . That zero is the graph's horizontal intercept.
Losing the same percent each hour is different: the amount lost shrinks, the graph bends, and the model is exponential. A percent of the input is still linear, though: 6% of is , a rate of 0.06.
The First Units Cost Differently
Some prices have an opening amount that covers the first few units, and a rate for each unit after that.
If $50 covers the first 3 hours and each additional hour costs $12, only hours are charged at $12:
Write it with first, then expand. Test the boundary: at , the rule must give the opening price, and . To run it backward, subtract the opening price, divide by the rate, then add back the units it covers: a $158 bill is more hours, so 12 hours in all.
What Each Number Means
Questions about meaning want one sentence. Say yours, with units, before you read the choices.
- The starting value : the output when the input is 0. Here, the cooler starts with 60 liters.
- The rate : the change in output for each one unit of input. Here, the water drops 5 liters each hour.
- A point : when the input is , the output is . Each number keeps its own unit.
- The horizontal intercept: the input where the output is 0. Here, the cooler is empty after 12 hours.
When the input is shifted, the stand-alone number is the output at the shift. In , the 900 is the value when , because that makes .
Keep going
Build the basics first
Foundations has free readiness checks and lessons in the English and math the SAT expects.
Check Your Skills, the strategy for each kind of question, worked examples and practice from Easy to Hard are in the Quaero SAT Course.
More Algebra
Linear equations in one variable
Solve SAT linear equations by keeping both sides equal: balancing, simplifying each side, answering what is asked, word problems and how many solutions.
Read the concepts →SAT essentials · MathLinear equations in two variables
Read slope from two points, switch between the three forms of a line, find intercepts, and spot parallel and perpendicular lines.
Read the concepts →SAT essentials · MathSystems of linear equations
Solve two equations at once by substitution or elimination, read the solution on a graph, count solutions, and set up word problems with two unknowns.
Read the concepts →SAT essentials · MathLinear inequalities
Solve one-variable inequalities, flip the sign at the right moment, turn “at most” and “at least” into symbols, and handle whole-number answers and ranges.
Read the concepts →