Skip to content
SAT essentials · Math

SAT circles: equations, arcs and angles

On the SAT a circle is often an equation. Its center and radius sit in the standard form, and completing the square gets you there.

These are the concepts this skill rests on, the same pages as in the lesson.

The Equation of a Circle

Every Point the Same Distance

A circle is every point at one fixed distance from one point. The point is the center, and the distance is the radius, rr. In the xyxy-plane, call the center (h,k)(h, k) and any point on the circle (x,y)(x, y).

A circle with center (h, k) and a point (x, y) on it. A right triangle joins them: a horizontal leg x minus h, a vertical leg y minus k, and the radius r as the hypotenuse. (h, k) (x, y) x − h y − k r (x − h)² + (y − k)² = r²

The horizontal gap is x−hx - h, the vertical gap is y−ky - k, and the radius is the hypotenuse. The Pythagorean theorem gives the standard form of a circle:

(x−h)2+(y−k)2=r2(x - h)^2 + (y - k)^2 = r^2

A point is on the circle exactly when its coordinates make this equation true.

Reading the Center

The center is the pair of values that make each binomial zero.

The circle (x + 3) squared plus (y minus 3) squared equals 4, on a grid. Its center is at (negative 3, 3) and its radius is 2. x y −6 −4 −2 2 2 4 6 O (−3, 3) (x + 3)² + (y − 3)² = 4 x + 3 = 0 when x = −3 y − 3 = 0 when y = 3 center: (−3, 3)

(x+3)2(x + 3)^2 is zero when x=−3x = -3, because x+3=x−(−3)x + 3 = x - (-3). (y−3)2(y - 3)^2 is zero when y=3y = 3. So the center is (−3,3)(-3, 3). Read each sign from the zero, not from the page: a plus sign in a binomial means a negative coordinate.

A squared term with no number, such as x2x^2, means that coordinate is 0, because x2=(x−0)2x^2 = (x - 0)^2.

The Right Side Is the Radius Squared

The number on the right side is r2r^2, not rr. Take its square root to get the radius.

A circle with center (1, negative 2). A radius is labeled r = 5 and a diameter is labeled 10. Beside it: the right side of the equation, 25, is r squared. (1, −2) diameter = 10 r = 5 (x − 1)² + (y + 2)² = 25 r² = 25, so r = 5 diameter = 2r = 10 If r² = 12, r = 12 = 23.
  • A right side of 25 means a radius of 5 and a diameter of 10.
  • A right side that is not a perfect square is normal. A right side of 12 means r=12=23r = \sqrt{12} = 2\sqrt{3}.

To write an equation from the center and radius, use the same facts in reverse: a negative center coordinate becomes a plus sign, and the radius is squared. A center of (1,−2)(1, -2) and a radius of 5 give (x−1)2+(y+2)2=25(x - 1)^2 + (y + 2)^2 = 25.

How Far a Circle Reaches

No point of a circle is more than rr from its center, so the center and the radius fence it in.

A circle with center (4, 4) and radius 3 on a grid, inside a dashed box from 1 to 7 in x and from 1 to 7 in y. Its highest point is (4, 7). x y 2 4 6 8 2 4 6 8 O (4, 7) center (4, 4), radius 3 x: from 4 − 3 to 4 + 3, so 1 ≤ x ≤ 7 y: 1 ≤ y ≤ 7 highest point: (4, 7)

h−r≤x≤h+rk−r≤y≤k+rh - r \le x \le h + r \qquad k - r \le y \le k + r

Each end of a range is reached at exactly one point. Here the highest point is (4,7)(4, 7), straight above the center. Use rr, not r2r^2, for the fence.

Circles and Points

A Circle From Points

Sometimes you get points instead of an equation. First decide which kind you have.

A circle with a diameter from A (1, 3) to B (7, 5). The center is the midpoint, (4, 4). Below: the midpoint and the squared length of the diameter, 40, so the radius squared is 10. A (1, 3) B (7, 5) (4, 4) center = midpoint: ((1 + 7) ÷ 2, (3 + 5) ÷ 2) = (4, 4) diameter² = 6² + 2² = 40 radius² = 40 ÷ 4 = 10
  • Endpoints of a diameter: the center is their midpoint, and the radius is half their distance apart.
  • The center and one point on the circle: the radius is the distance between them.

The equation needs r2r^2, and the distance formula reaches r2r^2 just before its square root, so stop there. For a diameter, r2r^2 is the squared diameter divided by 4, not by 2.

Three points on the circle. The center is the one point at the same distance from all three. Look for two points that are level (or one directly above the other): the center lies on the line halfway between them. For (−1,3)(-1, 3), (7,3)(7, 3), and (1,9)(1, 9), the first two are level, so the center is on the line x=−1+72=3x = \frac{-1 + 7}{2} = 3. Call it (3,k)(3, k), and set its squared distances to (7,3)(7, 3) and (1,9)(1, 9) equal:

42+(k−3)2=22+(9−k)2⇒25−6k=85−18k⇒k=54^2 + (k - 3)^2 = 2^2 + (9 - k)^2 \quad\Rightarrow\quad 25 - 6k = 85 - 18k \quad\Rightarrow\quad k = 5

The center is (3,5)(3, 5), and r2=42+22=20r^2 = 4^2 + 2^2 = 20. Check the third point: (1−3)2+(9−5)2=20(1 - 3)^2 + (9 - 5)^2 = 20.

Inside, On, or Outside

To place a point, compare its distance dd from the center with the radius.

A circle with center O and radius r. Point P is inside, at a distance less than r; point Q is on the circle; point R is outside. O P Q R P: d < r, inside Q: d = r, on it R: d > r, outside d = distance from the center
  • d<rd < r: the point is inside.
  • d=rd = r: the point is on the circle.
  • d>rd > r: the point is outside.

Compare like with like. The equation gives r2r^2, so compare d2d^2 with r2r^2: substitute the point into the left side and compare the result with the right side.

Touching an Axis

A circle is tangent to a line when it touches the line at exactly one point. The distance from the center (h,k)(h, k) to the xx-axis is ∣k∣|k|, a vertical gap. The distance to the yy-axis is ∣h∣|h|.

A circle with center (4, 2) and radius 2 on a grid. It touches the x-axis at (4, 0): the distance from the center down to the x-axis, 2, equals the radius. x y 2 4 6 2 4 O |k| r center (4, 2), r = 2 |k| = 2 r = 2 equal, so it touches the x-axis at (4, 0)
  • Tangent to the xx-axis: ∣k∣=r|k| = r.
  • Tangent to the yy-axis: ∣h∣=r|h| = r.

The xx-axis pairs with kk, the yy-coordinate. That pairing is easy to swap, so sketch it.

Expanded Form

Expanded Form Hides the Center

Squaring out standard form gives the expanded form. It is the same circle, but the center and radius no longer show.

One circle, center (2, negative 1) and radius 3, with its equation written two ways: standard form and expanded form. (2, −1) 3 standard form: (x − 2)² + (y + 1)² = 9 expanded form: x² + y² − 4x + 2y − 4 = 0 the same circle

(x−2)2+(y+1)2=9(x - 2)^2 + (y + 1)^2 = 9

x2−4x+4+y2+2y+1=9x^2 - 4x + 4 + y^2 + 2y + 1 = 9

x2+y2−4x+2y−4=0x^2 + y^2 - 4x + 2y - 4 = 0

Each linear coefficient is −2-2 times a center coordinate: −4=−2(2)-4 = -2(2) and 2=−2(−1)2 = -2(-1).

Completing the Square

To get back from expanded form, complete the square for xx and for yy.

An area model. A square of side x, two strips of 2 by x, and a missing 2 by 2 corner. Filling the corner adds 4 and makes a square of side x + 2. x² 2x 2x 4 x 2 x 2 x² + 4x is one square and two strips of 2x missing corner: 2² = 4 x² + 4x + 4 = (x + 2)²
  1. Group the xx terms and the yy terms. Move the constant to the right side.
  2. For each group, take half the coefficient and square it.
  3. Add that number to both sides.
  4. Write each group as a squared binomial. Read the center and the radius.

x2+4x+y2=5  ⇒  (x2+4x+4)+y2=5+4  ⇒  (x+2)2+y2=9x^2 + 4x + y^2 = 5 \;\Rightarrow\; (x^2 + 4x + 4) + y^2 = 5 + 4 \;\Rightarrow\; (x + 2)^2 + y^2 = 9

If x2x^2 and y2y^2 have a coefficient, as in 2x2+2y22x^2 + 2y^2, divide every term by it first. After completing the square, the right side must be positive, or the equation is not a circle.

One Circle From Another

Moving a Circle

Shifting a circle changes only its center. The radius, and so r2r^2, stay the same.

Circle A, center (negative 2, 1), radius 2, and circle B, the same size, center (3, 3). The center moved 5 right and 2 up; the radius did not change. x y (−2, 1) (3, 3) A B center moves 5 right, 2 up radius stays 2 r² stays 4

Circle A is (x+2)2+(y−1)2=4(x + 2)^2 + (y - 1)^2 = 4. Shifted 5 right and 2 up, its center goes from (−2,1)(-2, 1) to (3,3)(3, 3), so circle B is (x−3)2+(y−3)2=4(x - 3)^2 + (y - 3)^2 = 4.

Move the center first, then rewrite the binomials. Moving right adds to hh; moving up adds to kk.

Scaling a Circle

The area of a circle is A=πr2A = \pi r^2. Multiplying the radius by mm multiplies r2r^2, and therefore the area, by m2m^2.

Doubling a radius of 2 gives a radius of 4. The equation's r2r^2 goes from 4 to 16, not to 8, and the area goes from 4π4\pi to 16π16\pi: four times as much.

Two circles with the same center. The inner circle has radius 2; the outer circle has radius 4. Their areas are 4 pi and 16 pi. Doubling the radius multiplies r squared and the area by 4. 2 4 radius 2: area 4π radius 4: area 16π radius × 2 area × 4

If you're given a circle's equation in standard form, find the radius first: a right side of 4 means a radius of 2. To increase the radius by 1, change 2 to 3, not 4 to 5. The new equation has 32=93^2 = 9 on the right, and the new area is 9π9\pi.

Arcs and Angles

Central Angles and Arcs

A central angle has its vertex at the center. Its two radii cut the circle into two arcs: the shorter minor arc and the longer major arc.

A circle with center O. Radii to points A and B make a central angle of 100 degrees. The minor arc AB measures 100 degrees; the major arc ACB, through point C, measures 260 degrees. 100° A B C O minor arc AB: 100° major arc ACB: 260° 100° + 260° = 360°

An arc's degree measure equals its central angle. Minor arc ABAB measures 100∘100^\circ, and major arc ACBACB measures 360∘−100∘=260∘360^\circ - 100^\circ = 260^\circ. A major arc is named with three letters. The two arcs make the whole circle, in degrees and in length.

Arc Length

An arc is the same fraction of the circumference as its central angle is of 360∘360^\circ.

A circle with center O and radius r. A central angle of 90 degrees cuts off an arc that is one fourth of the circumference. O r 90° 90° ÷ 360° = 1/4 arc = 1/4 of 2πr arc ÷ circumference = angle ÷ 360°

arc length2πr=central angle360∘\frac{\text{arc length}}{2\pi r} = \frac{\text{central angle}}{360^\circ}

A 90∘90^\circ angle is 14\frac{1}{4} of a full turn, so its arc is 14\frac{1}{4} of the circumference. The proportion runs in every direction: put the unknown in its place and solve. An arc length is a length, so it uses the circumference 2πr2\pi r, never the area πr2\pi r^2.

Two Radii Make an Isosceles Triangle

Two radii and the chord joining their ends form a triangle with two equal sides, so its two base angles are equal.

Left: a circle with center O and points A and B on it. Radii OA and OB are both r, so triangle OAB is isosceles and its base angles are equal, both x degrees. Right: a 6 by 8 rectangle with every corner on a circle; its diagonal, 10, is a diameter. x° x° O A B r r two radii: isosceles 8 6 10 its diagonals are diameters
  • If each base angle is x∘x^\circ, the central angle is (180−2x)∘(180 - 2x)^\circ. A base angle is not the central angle.
  • If a rectangle has every corner on a circle, its diagonals are diameters. A 6-by-8 rectangle has a diagonal of 36+64=10\sqrt{36 + 64} = 10, so the radius is 5.

An equilateral triangle inside a circle. When every corner of an equilateral triangle is on a circle, the circle's center is also the triangle's center. Join the center to one corner and to the midpoint of a side at that corner. That makes a 30-60-90 triangle: its hypotenuse is the radius, its long leg is half a side, and its 60∘60^\circ angle is at the center. For a side of 12, the long leg is 6, so the short leg is 63=23\frac{6}{\sqrt{3}} = 2\sqrt{3}, and the radius, twice the short leg, is 434\sqrt{3}.

Radians

Measuring an Angle in Radians

A radian is the central angle whose arc is exactly one radius long.

A circle with center O and radius r. An arc as long as the radius cuts off a central angle of 1 radian, about 57 degrees. O r r θ arc = r θ = 1 radian 180° = π radians 1 radian ≈ 57° arc length s = rθ (θ in radians)

A full turn is 2π2\pi radians, so 180∘=π180^\circ = \pi radians.

  • Degrees to radians: multiply by π180\frac{\pi}{180}. For example, 60∘=60π180=π360^\circ = \frac{60\pi}{180} = \frac{\pi}{3}.
  • Radians to degrees: replace π\pi with 180. For example, 3π2=3⋅1802=270∘\frac{3\pi}{2} = \frac{3 \cdot 180}{2} = 270^\circ.

Check the size: for a positive angle, the radian number is always the smaller one. With the angle in radians, arc length is s=rθs = r\theta.

The Unit Circle

The unit circle has radius 1 and its center at the origin. Turn counterclockwise from (1,0)(1, 0) through an angle θ\theta, and you land on the point (cos⁡θ,sin⁡θ)(\cos\theta, \sin\theta).

The unit circle: radius 1, center at the origin. A point at angle theta, counterclockwise from the positive x-axis, has coordinates cosine theta, sine theta. The signs of cosine and sine are marked in each quadrant. x y θ (cos θ, sin θ) cos θ sin θ 1 cos +, sin + cos −, sin + cos −, sin − cos +, sin −
  1. Remove whole turns. Add or subtract 2π2\pi until the angle is between 0 and 2π2\pi.
  2. Name the quadrant. It fixes the signs: cosine (the xx-coordinate) is negative on the left, and sine (the yy-coordinate) is negative below.
  3. Find the size from the angle to the nearest part of the xx-axis, using the special triangles: π6\frac{\pi}{6} gives (32,12)\left(\frac{\sqrt{3}}{2}, \frac{1}{2}\right), π4\frac{\pi}{4} gives (22,22)\left(\frac{\sqrt{2}}{2}, \frac{\sqrt{2}}{2}\right), and π3\frac{\pi}{3} gives (12,32)\left(\frac{1}{2}, \frac{\sqrt{3}}{2}\right).

Tangent is yy over xx: tan⁡θ=sin⁡θcos⁡θ\tan\theta = \frac{\sin\theta}{\cos\theta}.

Tangent Lines

A Tangent Meets the Radius at a Right Angle

A line tangent to a circle is perpendicular to the radius drawn to the point where they touch.

A circle with center O. From a point P outside the circle, two lines touch the circle at A and B. Each radius, OA and OB, meets its line at a right angle, and PA equals PB. O P A B r r each radius meets its line at right angles PA = PB
  • In the xyxy-plane: the tangent's slope is the negative reciprocal of the radius's slope. A radius with slope 25\frac{2}{5} has a tangent with slope −52-\frac{5}{2}. Check: the two slopes multiply to −1-1.
  • From a point outside: the two tangent segments are equal, PA=PBPA = PB. Each one forms a right triangle with a radius, and OPOP is the hypotenuse of both.

Keep going

Check Your Skills, the strategy for each kind of question, worked examples and practice from Easy to Hard are in the Quaero SAT Course.

More Geometry and Trigonometry